EdgeStar Kegerator Review: Full Size Triple Tap Built-In Outdoor Kegerator – Stainless Steel Model:KC7000SSODTRIP

EdgeStar Kegerator Review

Edgestar Full Sized Kegerator

For any novices passing by, a kegerator stores, refrigerates, and dispenses a keg of beer in brewery-recommended conditions. Beer on tap! One keg of beer can be enjoyed for several months at a time and save you money and many trips to the store and so not only is the beer cheaper as you are buying it in bulk, but you are saving time and money trekking to your liquor store. There’s something very fulfilling about having your own draft beer on tap – it tastes better too. The best kegerator is a full-sized kegerator and some of the best kegerators are made by Edgestar. Check out this EdgeStar Kegerator review to learn how you can be serving up cold draft beer in the comfort of your own home!

Before we get to the EdgeStar Kegerator Review, let me tell you about a great offer from kegerator.com exclusively for Tailgate Party Site visitors. Just visit their website and use Coupon Code TAILGATE for $25 off any full sized EdgeStar kegerator or Coupon Code TAILGATE15 for $15 off the TBC50S mini Kegerator.

Use Coupon Code TAILGATE for $25 off any full sized EdgeStar kegerator!

EdgeStar Kegerator Review

Ok, so this Edgestar Full Sized Kegerator, is probably not one you are going to want to be dragging along to the parking lot for your weekly tailgate party. No Sir-ee Bob! This one is designed specifically for the home-gating you do when the USA has made it to the FIFA World Cup and you haul your big screen TV to your backyard kitchen and invite the lads over for a pint or two (as they say in Old Blighty). Allow me to translate. If you have a BBQ area with a good sheltered space to build in a kegerator, and you feel that football (soccer) is worth cheering along in between beers, then this is the kegerator for you. (U-S-A, U-S-A, U-S-A! ohhhhhhhh …. Germany ….?)

Just remember that you cannot use an indoor kegerator outside. Only outdoor kegerators should be used. Because of the intensity of temperatures and other environmental factors, using an indoor kegerator outside stresses the unit’s compressor, shortens its life, and will not chill beer to its optimal temperature. That can lead to foamy beer and wastage. Most home kegerators function best in room temperature environments (mid-70 degrees Fahrenheit). For any environment above 85° Fahrenheit or below 50° Fahrenheit, an outdoor kegerator is recommended. This one fills that bill perfectly as it has the additional insulation and manufacturing robustness to cope with changes in temperature.

This sleek kegerator is kind of industrial looking. But that has its advantages as any spills don’t have nooks and crannies and decoration to make cleaning a chore. A quick clean is all it takes. But do read my other story about the King of Kegs. Careful maintenance and cleaning (faithfully after every party) will guarantee it gives great service for many years AND it will retain its value.

Not only can you serve up a cold draft beer at home, but THREE different brews of the cold, amber fluid. It has not one, not two but THREE taps on its top and you can serve your own choice of drinks in it. You can have it installed in the man-cave, the BBQ area, the outdoor kitchen, garage, workshop or hey, maybe in your breakfast room. I know people who could appreciate the latter option. NOTE: If in the workshop, install at the opposite end of the room from your super-sharp power tools. Oh and it is very simple to install. There’s an installation manual that spells it out for you.

The first thing I must tell you is that you can get your beer in this quantity and SAVE 50% of the cost of the equivalent in bottles or cans. So, in this economic climate, it is a must for the serious beer drinker.   A kegerator with a half barrel keg will hold up to 165 beers (12 oz. servings) so run the numbers on that! If you use reusable glasses instead of red cups, there’s another saving and hey, you are doing a good deed for the environment. But who can resist the red cup? They are essential for beer pong after all.

Freestanding kegerators cannot be built in. This is because many refrigerators vent heat out the back of the unit, which would be trapped if built into cabinetry. The front ventilation of the Model:KC7000SSODTRIP keeps it cool and inexpensive to run. The system operates on powerful forced air, cold air being evenly distributed throughout the kegerator to maintain your desired temperature. Because of that system, possible hot spots are eliminated. No warm beer! A perfect pour every time!

Beer temperature

Firstly, just remember it isn’t just for beer. You can fill your kegerator with stout or anything you like. Whether you prefer a cool stout or an ice-cold lager, you’ll be able to keep your kegs as cold as you need using the integrated thermostat that goes as low as 32ºF.   You could put root beer in there for your designated drivers. The temperature control is really important for correct delivery of beverages. In this kegerator, cold air is directed up to and throughout the beer tower during a pour. This prevents the beer from foaming which is a result of warming. That’s a great feature as you get the most from your beer purchase if you don’t waste half of it as foam.   HINT: keep your glasses (if you are using glasses for that frosty drink) in the fridge or even the freezer and your beer will taste spectacular.

The Kegerator can be installed as a free-standing unit or you can build it in beneath a counter for a flush look. The materials used in the walls on the exterior are hardy and tough in order to cater for their ability to be installed outside. Its heavy-duty door, entire cabinet, and professional towel-bar handle are fully wrapped in tough stainless steel and this makes it extremely rust, heat and water resistant. It’s able to withstand outdoor elements and this kegerator refrigerator is approved for use in your outdoor kitchen, bar or garage.

Technical Specifications

Here’s the technical info in regard to the contents:

  • 1 x 5lb Luxfer CO2 tank. Note, you will need to get this filled when empty so google your supplier before you commit. Refillers can save you money.
  • 1 x dual gauge regulator
  • 3 x D Sankey couplers
  • 3 x NSF PVC Beer lines
  • 3 x red CO2 lines
  • 1 x stainless steel triple tap beer tower
  • 3 x 304 stainless steel faucets for the tower
  • 3 black tap handles.

BONUS: You can customize these by adding tap handles with your team logo.

Los Angeles Dodgers Baseball Beer Tap Handle Kegerator

Baseball Beer Tap Handle

or chalkboard so you can put your homebrew’s name on there. And please come up with a better name than ‘Biff’s Panther Piss’. That’s so old-school.

There is also a stainless steel top cover with a drip tray, guard rail and 4 casters which you can use if you prefer your kegerator to be mobile rather than built in. There is an advantage to having the casters installed as, if you have any kind of spillage, it is great to be able to slide the kegerator out and clean beneath it before the beer solidifies. You want to avoid that old stale beer smell if you possibly can. Even my hardest-drinking buddies don’t enjoy that smell. NOTE: if you do have the casters put on the base, be sure to allow for their extra height when you are planning your counter space. You won’t want to cover the top of the keg as that is where the taps, guard rail and spill-tray are, but you will want it to be flush with the counter either side.

Operating this kegerator is really easy. All unit settings, including temperature and interior lighting, are easily adjusted using an electronic control panel that features push buttons and a digital temperature display. Inside it, LED interior lighting illuminates your keg and keeps your electricity consumption low as it is a cold light (doesn’t give off any heat). The temperature of the beer kegs remains uncompromised.

Just like on those upmarket fridges, the door on the Model # KC7000SSODTRIP is reversible. Say you want it to swing left, then all you need do is install it that way. The holes are already there for your need. If you are installing it in a line with your BBQ and other cabinets, you will appreciate this feature as there is a definite logic to the way an appliance door swings.

Here’s what you can fit inside it:

  • 1 full sized keg. Holds 165 x 12 oz. glasses.
  • 1 oversized beveled edge keg. Holds 82 x 12 oz. glasses.
  • 1 quarter keg. Holds 82 x 12 oz. glasses.
  • 1 slim quarter keg. Holds 82 x 12 oz. glasses.
  • 1 – 3 sixth barrel kegs. Holds 56 x 12 oz. glasses each Sixth.
  • 1 – 3 Cornelius keg. Holds 53 x 12 oz. glasses each Corny.
  • 1 slim quarter plus sixth barrel keg
  • 1 slim quarter plus 1 Cornelius keg.

If you put say 3 different sixths in there, you can make them all contain a different ale. How impressive you will be to all those party animals in your life!!

A note on sizes – Because keg fit varies between different kegerators, some units cannot hold certain brands of beer kegs.   Coors Light and Miller Lite, for instance which are “oversized” or bulkier than other standard kegs often have an overlap and don’t fit. An easy way to gauge if these brands will fit in your kegerator is by checking its width. Kegerators with an overall width of 23 inches or more can accommodate light brands. Do your homework. Go to the store with a measuring tape and measure those kegs before deciding.

A manual is provided and a One Year Warranty along with clear assembly instructions and you can also download these from the manufacturer.

Dimensions

HEIGHT: 34 3/8″ WIDTH: 23 13/16″ DEPTH: 25 3/8″ D

The interior dimensions are a little less than that. I have read some reviews of the Edgestar that say that normal sized kegs do not fit inside. Be very aware of the exact sizes and before you order, ask the question whether your specific kegs will fit. I know that some kegs have small variations that may make this not work. However, the list above is what the manufacturer claims will fit.

At 120 watts you CAN if you need to, run it off a battery pack in the parking lot. 1.03 amps. Handle with care, though, if you are going to transport this kegerator. I think I would avoid transporting it full and carry your actual kegs in a cooler and install at the tailgate party site. However, the ultimate use of this model is as a built-in.

Input voltage = 115V/60Hz

Weight 115 pounds so it will fit on the back of your Silverado if you so desire!

When your kegerator arrives, unpack, install, switch on and wait 24 hours before adding beer. Only put chilled beer in. But after that, let the drinking begin! Enjoy!!

Kegerator Cleaning Kit

Kegerator Cleaning Kit

Kegerator Cleaning Kit

Cleanliness is next to beeriness.

It’s highly recommended that you purchase this specifically tailored Kegerator Cleaning kit.

The key to buying beer from a legitimate brewery (boutique or not) is the spotlessly clean environment that all components are kept in. This kit will help you ensure that your beer tastes brewery fresh. It works by removing buildups of bacteria, molds, yeast, and beer stone from your beer lines, faucet, and keg coupler. It is extremely vital to keep to a strict regimen of cleaning so that all components are spotless.

Included is a one quart shatter proof bottle, enough beer line cleaning compound (powder) for about 17 cleanings.

The 5/8″ Nylon Faucet Brush can clean the toughest buildups in your coupler and faucet.

The Check Ball Lifter inserts into the bottom of the coupler probe and lifts the check ball, permitting cleaning solution to flow through the coupler when cleaning your system. This saves time by eliminating the need to remove the coupler while cleaning the system. There is an extra neoprene washer and faucet wrench in case you lose your originals which is a thoughtful inclusion.

A handy instruction manual walks you through the cleaning process and in as little as 15 minutes, you will have a sanitized kegerator, providing you with perfectly fresh beer. As your kegerator has 3 taps and lines, you may find it takes a bit longer than 15 minutes. But trust me, it is really important to keep those lines and taps clean. In fact, the more regularly you do the cleaning, the quicker it is to clean. More challenging is if you let that gunk build up for a few parties. Then you have a real handful of soaking, scrubbing and so on. Don’t be tempted to boil those components to sterilize them. You will ruin them. Only mentioning this as I do have a mate whose missus did exactly that thinking they were the same as baby bottles.

So the golden rule: after every keg, clean those lines and taps. Wipe up all spills as you go. As it is stainless steel water is enough to clean the exterior. Avoid abrasives.

It is NSF Approved.

I hope you’ve enjoyed this review of the EdgeStar Full Size Triple Tap Built-In Outdoor Kegerator! If you went out and purchased it (or, if you already own it) leave a comment for our visitors with your own EdgeStar Kegerator Review to let them know what you think!

NOTE FOR CALIFORNIAN BUYERS:

PROPOSITION 65 WARNING:
This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.